Last month, a 1.7 mile section of the WB&A Trail opened, bringing the separate parts in Anne Arundel and Prince George’s County as close to one another as they’ve ever been. A few more additions to the trail would mean an uninterrupted bike route from DC to Baltimore.
The WB&A trail runs from Odenton to Lanham, with a gap at the Patuxent River. There are plans to bridge the river, extend it south to Washington and north to BWI and then onward to Baltimore, which would create a full trail between DC and Baltimore.
When the WB&A was first built, it was a state of the art, electric commuter railroad that ran on three lines connecting Washington, Baltimore, Annapolis and the B&O railroad at Annapolis junction. It operated from 1908 until 1935. Work on the WB&A trail began almost 20 years ago, when the bulk of the Prince George’s section from Glen Dale to Bowie was constructed, and planning dates back to the early 1990s.
During the seven years after that first section opened, the trail was extended to the banks of the Patuxent River on the Prince George’s side and 5.5 miles of the Anne Arundel section of the trail was built across the town of Odenton.
Work stalled after that, though, leaving a one-mile gap between the two sections of the trail.
The trail is expanding, but there’s still a gap to bridge
In recent years, hope for connecting the trails has been rekindled. Anne Arundel and Prince George’s counties have resolved the issue about how to close the gap, deciding to go with a detour that was the subject of a lot of debate. While this isn’t ideal for trail users, and plans to build on the right-of-way make it worse, it does mean the stalled project is moving forward.
To that effect, this year Prince Geroge’s County completed the WB&A Trail Spur, which extends the trail west along the old Race Track Railroad Spur. And last month, Anne Arundel County built the 1.7 mile trail extension. This brought both trails across the river from one another, albeit nearly a mile from where the train used to cross the river.
The newest section of the WB&A Trail along Conway Road in Anne Arundel County. Photo by John Ausema.
The next step is to build a bridge across the Patuxent River. Using a $560,000 state grant, the two counties plan to begin the design phase later this year on a bridge near the location of an old road crossing that disappeared sometime prior to 1945. Once the new bridge is there, the WB&A Trail, as officially planned, will be complete.
South to Washington, DC
The recently drafted Prince George’s County Trails Plan proposes dozens of connections to the WB&A and extensions, most notably extending the trail south along MD-704 all the way to DC’s Marvin Gaye Trail and to the Anacostia Tributary Trails via US-50.
North to the BWI Trail
Subsequent plans to the original 1990’s master plans for the WB&A, South Shore and West County (what the WB&A in Anne Arundel was called at the time it was planned) trails have taken the opportunity to expand and tie into it.
The 1995 West County Trail Master Plan included a sidepath along WB&A Road from the north end of the current trail all the way to the BWI Trail — the loop trail that completely encircles BWI airport. The 2002 Severn Small Area Plan included this same trail, built in four phases. Unfortunately, this trail extension is not included in the county’s 2013 Master Plan.
Severn Small Area Plan bicycle and pedestrian map, showing the WB&A trail in red running north-south.
The BWI Connector Trail
In addition to the connection to Washington, the bridge across the Patuxent and the connection to the BWI trail, finally realizing the dream of a Washington to Baltimore bicycle greenway would require one other trail: the BWI Connector (formerly the Light Rail Trail).
This trail would extend the existing Light Rail Trail, which currently runs from the BWI Trail to Maple Avenue in Linthicum Heights, 2.4 miles north to connect it to either Baltimore’s Middle Branch or Gwynn Falls Trails. Such a connection was one of the top priority projects in Maryland Trails: A Greener Way To Go, the state’s 2009 statewide trail vision.
It was also one of five recommendations for a hiker-biker trail network in the 2003 BWI/Linthicum Small Area Plan and was a public recommendation in the Baltimore region’s Maximize2040 surface transportation plan, though it’s not mentioned in the plan itself.
A complete Washington-Baltimore Greenway could end up looking something like to this:
Four separate projects, all in different stages of planning and development, would have to come together to make this vision happen. But the small section opened last month in Anne Arundel County brings it slightly closer to fruition.